Stainless Steel 220V SS Curing Tank

Green Lab Equipments is One Of The Leading Manufacturer and Supplier of Orbital Shaker Incubator, Laboratory Incubators,Laboratory Oven,Testing Equipments,Water Bath,Laboratory Chamber.Product Specification Temperature35 Deg C or 100 Deg CSize150 mm / 70.6 mmMaterial for ConstructionStainless steelDisplayDigitalAccuracy+/- 1%Cycle24 Hour cycleMinimum Order Quantity1 Piece Product Description The tank has been designed to accommodate 150mm / 70.6mm cube moulds upto 36/72 cube mould and fully insulated, complete with a hinged lid, heater, thermostat and re-circulated pump. Provision of two removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The Tank is heated by an immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 35° C or 100° C ± 2° C / 27° C +2° C,expect for the 15 minutes after immersion of the freshly made specimens.Features:24 Hour cycle from time of mixing. Controlled 35° C or 100° C ± 2° C Curing Temperature for concrete. Controlled 27° C ± 2° C Curing Temperature for grey cement.ZI 2045A Curing Tank for 6/12 moulds of 150 mm / 70.6 mm size ZI 2045B Curing Tank for 12/24 moulds of 150 mm / 70.6 mm size ZI 2045C Curing Tank for 24/48 moulds of 150 mm / 70.6 mm size ZI 2045D Curing Tank for 36/72 moulds of 150 mm / 70.6 mm sizeNote:Accelerated curing tank with cooling arrangement is also available of request.