Diesel Particulate Monitor

The personal, real-time silica monitor, providing immediate identification of problem areas and tasks. Implement controls to reduce exposures to hazardous particulates and then use it to measure the effectiveness of controls moving forward. There's no further need for two co-located devices – one with built-in compensating pump and pre-weighed filter cassette simultaneously provides real-time particulate readout and gravimetric sampling. It alerts users of approaching thresholds for immediate corrective action. Designed carefully with you in mind, it provides the widest range, lowest detection limit, and best resolution of any personal dust monitor on the market. • Easy touch screen operation• Instantaneous, continuous display of TWA, STEL, Minimum, Maximum concentration in mg/m3• Sensor mounts directly in the breathing zone for a personal sample• Interchangeable sampling inlets for Inhalable, Thoracic and Respirable measurement• Can accept pre-weighed and preloaded 25 or 37 mm filter cassettes• Small and lightweight with integral belt clip• Operates for over 22 hours using rechargeable Li-Ion battery• Automatic data logging• Multiple language options• Easy to use DustComm Pro Software for data downloading, trend analysis and comprehensive reporting of concentration changes over timeSpecifications Accuracy ±10% to filter gravimetric SAE fine test dust Sensing Range 0.001 to 500 mg/m3 or 1 to 500,000 µg/m3 Display Resolution 1 µg/m3 (0.001 mg/m3) Particle Size Range 0.1 to 10 µm Respirable 0.1 to 50 µm Thoracic 0.1 to 100 µm Inhalable (IOM) Measurement Precision ±0.02 mg/m3 Display 8.9 cm (3.5 in) colour with auto-dimming Displayed Particle Concentration Instantaneous, TWA, STEL, Minimum, Maximum Sample Flow Rate 1 to 5 L/min (adjustable). Auto adjusts for sample head Power Rechargeable Li-Ion battery Operating Time ≥22 hours Charging Time 3 hours, depending on battery state Digital Output Micro USB Data Storage 43,200 data points Temperature Operating: 0 to +50°C (32 to 122°F) Storage: -20 to +70°C (-4 to 158°F) Dimensions Case: 8.9 x 5.7 x 12.1 cm (3.5 x 2.25 x 4.75 inches) Sensor: 4.4 x 3.8 (1.75 x 1.5 inches) Weight 508 g (1.12 lbs) Applications• construction and demolition sites• slate mining and slate processing• potteries, ceramics, ceramic glaze manufacture, brick and tile manufacture• foundries• coal minings• refractory production and cuttingFeatures:• Flow compensated pump for OSHA & NIOSH compliance monitoring• Compatible with any pre-loaded 37 or 25mm filter cassette• Tested and validated selective size inhalable and respirable sampling inlets• Miniaturized optical sensor mounts in OSHA defined breathing zone• Optional Wi-Fi, BLE, GSM, and networking capabilities.