Smart Focus 400 Air Plasma Cutter
₹3,00,000.00
Specification
- model
- Smart Focus 400 Air Plasma Cutter
- phase
- 3 Phase
- voltage
- 400 V
- frequency
- 50 Hz
- plasma gases
- O2, Ar / H2, N2, air
- connected load
- max. 116 kVA
- automatic grade
- Fully Automatic
- cutting current
- 35 - 400 A
- marking current
- 10 - 50 A
- plasma machine torch
- PerCut 4000
- maximum cutting range
- 100 mm
- recommended cutting range
- 1 - 70 mm; 70 mm (SS); 60 mm (MS) Piercing 50 mm
Add Quantity
Response within 4 hoursFree to enquire
Description
Plasma is generated by electric power and can easily be switched on/off, making it, in principle, suitable for using intermittent renewable electricity.A plasma cutter or plasma cutting system uses a plasma stream to transfer energy to a conductive work material. The plasma stream is typically formed by forcing a gas such as nitrogen, oxygen, argon — or even air — through a narrow nozzle.It is used to cut through metal or to cut custom shapes and holes out of plate and sheet metal, straps, bolts and pipes. Once an industrial piece of equipment it is now used by creative artists also and hobbyist so anything from a shipyard to a sculptor could use a plasma cutter.Plasma cutters work by sending an electric arc through a gas that is passing through a constricted opening. The gas can be shop air, nitrogen, argon, oxygen. etc. This elevates the temperature of the gas to the point that it enters a 4th state of matter.
Verify supplier credentials before transacting. Enquiries create leads for the supplier.