eB2BMart

Airless Spray Painting Gun

₹3,000.00

Specification

type
Spray Gun
color
Silver
material
Stainless Steel
application
Marine
nozzle size
1.3 mm
coating type
Recommended Tip Size
cup capacity
200 ml
body material
Stainless Steel
automation grade
Automatic
country of origin
Made in India
power consumption
400 W
lacquers amp stains
.009 – .013 (e.g., 311)
interior latex paint
.015 – .019 (e.g., 517)
heavy primers exterior
.021 – .025 (e.g., 621)
enamels amp polyurethanes
.013 – .015 (e.g., 413)
types of nozzles and sprays
Full Cone
Add Quantity
Response within 4 hoursFree to enquire

Description

An airless painting gun is the end-point of a high-pressure system that atomizes paint by forcing it through a tiny orifice at extreme pressure ($500$ to $3,500$ psi), rather than using compressed air. This results in a faster application, thicker coats, and a professional-grade finish. Think of a garden hose: if you put your thumb over the end, the water turns into a spray. An airless gun does this at much higher intensity. No Air: Unlike HVLP (High Volume Low Pressure) systems, no air mixes with the paint. Atomization: The sheer force of the paint hitting the still air at the nozzle "shatters" the liquid into tiny droplets. Transfer Efficiency: Because there is no air "blowing" the paint, more material actually lands on the wall and less floats away as overspray compared to traditional compressed air sprayers. The tip is the most important part of the gun. The three-digit code on the handle tells you exactly what it does: First Digit (Fan Width): Multiply this by 2 to get the spray width (in inches) from $12$ inches away. Example: A 517 tip creates a 10-inch wide fan. Last Two Digits (Orifice Size): This is the size of the hole in thousandths of an inch. Example: A 517 tip has a 0.017-inch opening. Coating Type Recommended Tip Size Lacquers & Stains .009 – .013 (e.g., 311) Enamels & Polyurethanes .013 – .015 (e.g., 413) Interior Latex Paint .015 – .019 (e.g., 517) Heavy Primers/Exterior .021 – .025 (e.g., 621) Trigger Guard: Prevents accidental discharge. Gun Filter: A small mesh filter inside the handle. It’s the final defense against clogs reaching the tip. Tip: Use a fine mesh (100) for thin stains and a coarse mesh (60) for latex. Reversible Tip ("SwitchTip"): If the tip clogs, you simply rotate it $180$°, pull the trigger to blow the clog out, rotate it back, and keep painting. This is the most critical safety rule: Never put your finger near the tip. At $3,000$ psi, the paint stream can act like a needle, injecting paint directly through your skin into your bloodstream or tissue. This is a surgical emergency and often looks like a minor cut initially.

Verify supplier credentials before transacting. Enquiries create leads for the supplier.

Airless Spray Painting Gun - ₹3,000.00 | Jay Tools And Hardware Stores | eB2bMart