2 Channel Zypher Labs Dubstepper Z Series Z8 Amplifier, 8000 W

Output Power Per Channel: 100Hz, 0.1% THD both channels driven : 8 Ω 2450 OR 4 Ω 4000 OR 2 Ω 3200Input Sensitivity : 1.4vInput Impedance : 10k ΩSlew Rate : 20v/uSDistortion, SMPTE : 0.1%Frequency response at 1 watt : 20Hz – 1kHzDamping Factor (8 Ω) : 1000Signal to Noise Ratio (SNR) 100dBCrosstalk 85dBOutput Circuit Type Class-D (Pulse Width Modulation)Controls Front Level ControlConnectors (Input) Neutrik XLR Male & Female (Balanced)Connectors (Output) 4x Neutrik Speakon (8Ω/Speakon)LED Indicators Power, Signal Bar Graph, Clip / Limit / ProtectCooling 1 x Variable Speed Fan, Front to Back AirflowAmplifier Protection DC Offset, Short Circuit, Auto-Ramp, Soft Start,Thermal, Bus Pumping, Over Current and Clip MonitoringSpeaker Protection CCut-Off Relays on Speaker Outputs, AC Mains Fault Fuse,Post Capacitance Rail Fuses, DC Detect./Power Requirements (Nominal Voltage) 240v AC, 50HzOperating Voltage Range 170v AC to 255v ACAC Connection 1.5 M Mains Cord with Heavy Duty 16A Three-Pin PluggWeight 38.5kg19 inch Rack Units 3UDimensions (mm) HxWxD 133mm x 483mm x 379mm (5.25in x 19in x 13.78in)NOTE: Specifications are subject to upgradation & change without notice.