HSS Cutters

High concentricity within 100 μm delivers consistently smooth cuts and reduced chatter.Impacts are absorbed by tough tips and body, complimented by a tooth hardness of 65 HRC. In-house vacuum heat treated for optimum balance of performance and extended life.Narrow cutting width of 5.1 mm for low torque and reduced energy consumption.HSS cutters have wide flutes to evacuate chips easily while less contact between the cutter and hole surface facilitates lower torque and power consumption.2-tip geometry: alternating tooth profiles assign a region for each tooth to remove, resulting in smooth & rapid cuts.FEIN HSS cutters are available in QuickIN and Weldon shanks.