Automatic Single Head Auger Powder Filling Machine

Salient Features : Compact CGMP model. All parts coming in contact with powder are made of Stainless Steel 316L. "No Bottle - No Filling" system eliminates wastage of costly powder. Conveyor driving is through High quality imported Gear motor. Machine speed can be adjusted by A.C. Frequency drive, which is time saving. Machine is provided with delrin conveyor belt to avoid sticking of vial on conveyor. Single track bottle movement, reduces setting of supporting guide rails and semi skilled person can also easily operate the machine. Pneumatic bottle holding system is connected with auger rotation, which eliminates chances of bottle transfer before completion of filling operation. Total PLC control for the machine. No change parts are required for any change in bottle diameter from 30 to 120 ml. Process Operation : The incoming dry bottles are fed through the infeed Turn Table with suitably guided on the moving delrin flat conveyor belt at the required speed for feeding. Filling head is mounted on machine top plate. When bottle reaches to the filling station, it will be hold by the pneumatic bottle holder. Immediately it will be sensed by the bottle sensor as soon as it gets the signals from sensor magnetic clutch starts to rotate which is mounted on auger shaft. It will fill the desired amount of powder to the bottle through auger, where rotation time is previously saved in PLC control. After filling of bottle pneumatic piston goes back and releases the bottle to move on conveyor. The main advantage of this machine is Pneumatic bottle holding system is directly connected with Auger rotation, so till bottle get filled with powder as per set value, pneumatic system will not going to release the bottle. Technical Specification : Model APF-40 Production Rate 20 to 40 Bottles/Minute Fill Capacity : 10 grms to 50 grms. (with different set of Auger and funnel) Fill range Depending upon Bottle opening and bulk density of powder. Accuracy � 2% depending upon consistency and the Uniformity of bulk density of powder Under controlled level of Humidity (i.e. 35%) Electrical Supply 1 H.P. for Main Drive , 0.25 H.P. for Conveyor Power Requirement : 440 Volts, 3 Phase, 50 Hertz Height of Conveyor: Adjustable from 850mm to 900mm Net Weight 400 kgs. Gross Weight 600 kgs. Overall Dimension 1525mm (L) x 1105mm (W) x 1800mm (H) Note : Electrical characteristics can be adjusted as per customer�s domestic power requirements Rights of technical improvement & modification reserved Illustrations & dimensions are shown for information purpose only Additional Information Item Code APFM Delivery Time Depends upon model Production Capacity Depends upon model Packaging Details Product & transport worthy wooden packing