Fully Automatic PET Blow Molding Machine, 50-500 ml
₹18,50,000.00
Specification
- weight
- 4000 Kg
- voltage
- 380 V AC
- dimension
- 250 cm
- bottle size
- 50-500 ml
- machine type
- Fully Automatic
- control pressure
- 8 MPa
- autoloader height
- 350 cm
- power consumption
- 20 kW
- no of mould cavity
- 2 Cavity
- blown bottle volume
- Upto 15k
- coolant temperature
- Upto 10 Deg C
- production capacity
- 2200 bottles/hour
- bottle neck diameter
- 28 mm
- main blowing pressure
- 5 MPa
- maximum bottle diameter
- 90 mm
- number of heating units
- 35
- number of heating zones
- 7
- total compressed air flow
- 64 Nm3/min
- number of places in the mold
- 1
- maximum bottle height with neck
- 19 cm
Add Quantity
Response within 4 hoursFree to enquire
Description
The Fully Automatic PET Blow Molding Machine is designed to produce PET bottle from preheated preforms stretched and blown two-steps by means of in quintuple mold. The finished product may vary from 0,25 up to 1,0 in capacity by productivity 2200 BPH. The machine consists of power unit, furnace for heating preforms, preform autoloader, container with control system. The preform autoloader is designed for preform orientation and feed them to heating area. The furnace for heating preform is designed for uniform heating of preform and positioning in area capture of gripping holder step by step. The power unit is designed for filing preform on mold and provides product blowing out, taking out of ready product from mold and feed them the next technological line. The use of servo-drivers provides uniform rate and intensifying for more quantity traction of preform before blowing out. Specialized valve terminal with self-diagnostic used for the control of air powered drive. The control of level heating bulb by means industrial and specialized module of control. The machine is equipped with pneumatic devices and servo-drivers, controller and electronics by "FESTO" company.
Verify supplier credentials before transacting. Enquiries create leads for the supplier.