Intercom Ball Cage, Guide Pillars & Bush

Lillo Silipigni created INTERCOM S.r.l. in 1981, which operates in the shearing and molding equipment sector of plastic materials. They currently offer a specific range of products which includes a complete assortment of tools for sheet metal and plastic processing and an extensive program dedicated to solutions special. The production includes: standardized guide elements according to DIN/ISO standards, punches and dies standard and customized, BMI200 mechanical tapping machines and SL2005 electronic tapping machines for threading inside the mold and standard and custom mold holder blocks. The use of the roller cage is essential if the steering system is subjected to high transverse forces. Intercom roller cage can support loads up to 12 times that of the classic ball cage guide, distributing the driving effort along the contact line of the profile of the roller itself. The support surface of the roller in fact distributes uniformly the load, thus ensuring a greater longevity of the entire system. Guide Pillars The guide pillar and guide bush align the fixed and moving halves of a mold in each cycle. The material cases are usually made of medium carbon steel and will have higher hardness. Self-Lubricating bush with Intercoat The INTERCOAT process coats the surfaces metallic. Through a pre-treatment mechanical the surface of the material is deeply cleaned. This allows to the fluoropolymer to anchor itself to the substrate, obtaining an extension of the properties anti-wear, anti-friction and anti-corrosion, reducing the risk of detachment. The coefficient of friction is between 0.05 and 0.2. Intercom guide, sliding friction, Intercoat self-lubricating sliding: It consists of a steel bush with a sliding surface covered with a special self-lubricating coating with addition of spiral lubrication channels, equipped with greasing system for topping up the grease. The steel bush body ensures proper breaking strength even in the presence of high bending stresses.