Pull Force Tester for Button Snap

PRC offers its most advance version of Button Snap Pull Tester. It is exclusively designed to test ‘Snap strength' of buttons / rivets/joints to ensure design tolerance and safety levels to prevent the separation between the snap and the garment.It consists of an upper snap-clamp, a lower fabric clamp & a force gauge mounted on a stand. The snap components are gripped by the upper snap clamp and the garment is fixed to the lower fabric clamp. By turning the top flywheel, the operator can apply a specific force and the holding force or the breaking strength can be recorded.Salient features: Dial type Push-Pull force gauge of 20 kg f Microcontroller based digital indicatorVertical stand to hold the gauge with arrangement to change the position of Gauge Fixture to grip the attachment Pull Fixture for buttonSuitable to grip buttons from 5 mm to 25 mm.Peak hold functionTechnical Specification: Measuring Indicator : Needle gauge / Digital IndicatorOperation : Automatic Motor : 0.25 hp with reduction Gear BoxMeasuring Capacity : 50 Kg fLoad Cell : S Type with self calibration FacilitySensitivity : 10 Gm MaximumGrip Separation : 210 mmNet Weight of Machine : 50 Kg. (Approx)Standard : D4846-88 standard test methodAccessories GRIP-1 : Three Pronged Grip for testing four-hole buttons and jeans buttonsGRIP-2 : Upper Universal Grip for testing female part of snap & male part of StudGRIP-3 : Upper Stud Grip for testing male part of baby snaps. GRIP-4 : Toothed Jaw Grip for ornaments, tufts, fixtures & other attachments