C Frame Power Press (100 Tons)

C Frame Power Press (100 Tons) serves as a sturdy manual mechanical press built for demanding industrial work. The frame forms the letter C and the steel sections give the body the stiffness needed to absorb 100 tonnes of force without distortion. Because the frame stays square, the ram descends in a straight line - punches, dies plus forming tools stay aligned during each stroke. The press exerts a maximum force of 100 tonnes - it drives thick punches through steel plate, shears large blanks, bends heavy bars and shapes stiff sheet metal. A flywheel, clutch but also crankshaft supply the power - the operator starts the cycle with a foot or hand control and the mechanical linkage converts rotary motion into one precise vertical stroke. No hydraulic pump or electrical servo is required - the machine delivers the same force as well as speed on every cycle, even in shops where power supply is limited. Manufacturers who need a reliable, high force press receive a machine that ships from stock and bolts straight to the shop floor. Grease fittings, an open back or a large bed allow fast die changes and simple maintenance. The design keeps all controls within reach - one operator sets stroke length, adjusts shut height next to positions safety guards without extra help. With its rigid C-frame, 100-tonne capacity and purely mechanical drive, the press gives continuous service for heavy punching, blanking, bending plus forming operations.