High Density Cartridge Heaters
₹300.00
Specification
- lead wires
- Crimped on Leads PTFE/FG wire,Swaged in Lead PTFE/FG wire
- lead length
- 30 cm
- power rating
- Upto 150 Watts/in2
- thermocouple
- J Type (Fe/k) K Type (Cr/Al) Grounded or Ungrounded
- maximum length
- 120 cm
- minimum length
- 2.5 cm
- voltage rating
- 12 V to 440 V
- current leakage
- Less Than 0.5mA
- heating element
- Ni/Cr 8020
- power tolerance
- +-10 percent
- sheath material
- Chrome Nickel steel
- unheated length
- 0.5 cm
- variation in mm
- 4mm to 30mm
- sheath temperature
- 750 degree C Max
- insulation material
- High purity MgO
- high voltage strength
- 500 V - AC
- insulation resistance
- 5 Mega
Add Quantity
Response within 4 hoursFree to enquire
Description
High-Density Cartridge Heaters are made of nickel chromium resistance wire wound on MgO care. The element assembly is inserted into chrome nickel steel tube centrally and filled with MgO powder. It is then compacted into a solid mass by Swaging. Swaging increases thermal conductivity, dielectric strength, and heater life. Features:Nickel resistance wireVarious termination exit optionDiameter from 4mm to 30mm, length from 25mm to 1200mmInbuilt J type or K type thermocoupleMaximum sheath temp 600 deg CWatt density 50 watts per sq inchDirect immersible in liquidsApplication:Packaging machinePet perform moldsDies and moldsHot stamping machinesHeat sealing machinesGlue gunsHeating of liquids
Verify supplier credentials before transacting. Enquiries create leads for the supplier.