Choksey Mastergrout CNS 50 M, For Construction

Mastergrout CNS 50M is a specially formulated cementitious grout which has excellent shrinkage resistance and free flowing properties suitable for machine foundations. The high strength properties of the grout ensure a stable and permanent support to the equipment, machines which transfer both static and dynamic loads on to it. Mastergrout CNS 50M is supplied as a ready-to-use dry powder requiring only the addition of clean water as per guideline of water powder ratio. Mastergrout CNS 50M has a unique formulation which does not cause corrosion of machine parts, bolts, etc. in contact with it. Mastergrout CNS 50M is a mixture of cement, fines & additives which imparts controlled expansion in the plastic state as well as reduces the water demand. Reduction in water demand provides high strengths & long term durable grout TYPICAL APPLICATION Machine foundations Bearing plates Boiler foundations Columns in precast constructions Concrete anchors, Turbines and D. G. sets It can be used for filling mivan, tyroid holes and groove filling application Mix 3.3 to 3.9 liters of water per 30 kg bag so as to achieve the groove filling consistency It can be used in RCC bricks/ Concrete blocks/ Siphorex blocks junctions at travelable consistency. Mix 4.1 to 4.3 liters of water per 30 Kg bag to achieve the required consistency depending on end application, nature of substrate The water requirement may be vary be vary depending upon climatic conditions, ease of mixing & nature of grout consistency required for end use. FEATURES / ADVANTAGES It has good pourability and flowability. This free flow nature, guarantees highest contact area with the machine base plate and other load bearing areas. It has an excellent non-shrink property. This volume stability ensures permanent contact with the bearing areas. Develops high initial and final strengths hence gives excellent support to the equipment that transfers dynamic and static loads on it. It is free from harmful chlorides and other aggressive chemicals which attack steel and hence ensures a non-corrosive supporting system. It is easy to mix and apply as only water of a definite quantity has to be added at site to the readymade grout. The cementitious grout with special additives and graded aggregates are compatible with concrete substrates. Pre-packed grout overcomes potential on site batch variations. Promotes rapid installations & early operation of plant.