Universal Gas Detector

Product Summary Universal transmitter connects to toxic and corrosive gas sensors 2 alarm relays with signal to horn/strobe, building systems, etc. Built-in audible horn and visual alarms with bright LED's 4-20mA analog output 24/7 Supervised electronics continuously checks sensor and system status Low-cost long life renewable sensor, $35 per recharge Quick gas calibration with a push of a button Optional remote cable to remote sensor up to 30 feet from transmitter. Features: The Universal Gas Detector is a compact gas monitor that�s ideal for protecting workers from toxic and corrosive gas exposures in the workplace. It consists of a generic transmitter/controller connected to a dedicated, renewable gas sensor that automatically inputs the gas and measurement range. Designed as a stand-alone monitor, the Universal Gas Detector can also be connected to any programmable logic controller or SCADA system. The heart of the system is a smart renewable sensor cell that�s programmed with the specific gas and measurement range information. Simply plug the sensor into any Universal Gas Detector transmitter and it�s ready to go. When servicing the sensors, they can be recharged with fresh electrolyte and dynamically gas calibrated in the maintenance shop away from the transmitter. Specifications: Sampling Method Diffusion. (Optional: sensor can be remote up to 30 feet from transmitter) Available Gases ammonia, bromine, chlorine, fluorine, hydrogen bromide, hydrogen chloride, hydrogen cyanide, hydrogen fluoride, hydrides, hydrazine, nitrogen dioxide, phosphine and sulfur dioxide. Other gases available; consult PureAire. Accuracy � 10% of full scale Operating Temperature -25 to +122F (-32 to +50C) Sensor Type Renewable electrochemical self-checking sensor with built-in microprocessor Sensor Life 3 to 8 years under normal conditions Gas concentration indicator Built-in LCD digital display, (back lit) Displays: Gas Name & ppm concentration, AL1, AL 2, System Fault messages. Signal Outputs 4-20 mA analog output,�Dual Level Alarm Relay Contacts Power Requirements 24 VDC, .25 amp Regulated power supply required Dimensions 5.5 (W) x 10.5 (H) x 3.25 (D) inches; (140 x 267 x 83 mm) Weight 1.2 lbs. (.5 kg) Enclosure Polycarbonate UL listed general purpose Optional NEMA 4X, IP 65 water resistant, (only available without built-in horn)