MECO 3600 AC DC True RMS Clamp Meter

The following safety information must be observed to insure maximum personal safety during the operation at this meter:Do not use the meter if the meter or test leads look damaged, or if you suspect that the meter is not operating properly.Use caution when working above 60V dc or 30V ac rms. Such voltages cause a shock hazard.When Using the probes, keep your fingers behind the finger guards on the probes.Measuring voltage which exceeds the limits of the clamp meter may damage the meter and expose the operator to a shock hazard. Always recognize the meter voltage limits as stated on the front of the meter.If the equipment is used in a manner not specified by the manufacturer, the protection provided the equipment may be impaired.