Connecting Shafts and Coupling, Size: 1 inch

Features:1. Have largest kinds of products domestically : Jaw coupling type, disk coupling type 2. Middle shaft has perfect straightness and concentricity 3. Realized low mass and low moment of inertia by using high stiffness aluminum alloy 4. Can be used with various kinds of fastening methods 5. Excellent in balancing performance 6. Increased convenience of long-distance connection and reduced costUse: 1. Pump system 2. Gantry system 3. Linear module 4. Screw Jack system 5. Lifting, printing machine 6. Machine tool and special use machineHow To Install: 1. Line up each axis which has to be connected- Misalignment(eccentricity, angular misalignment, end-play) over tolerance between both end axis can shorten connecting shaft'slifetime and cause severe vibration and noise.- Check each connecting shaft's model number and its misalignment tolerance- If you have any difficulties with axis line-up, contact Sungil Machinery Co., Ltd. 2. Install connecting shaft.- Remove foreign substances on each axis and inner diameter of hub.- Fasten the fastening bolts with torque wrench.Characteristics: 1. Transmits high torque 2. High precision concentricity and straightness 3. Perfect balancing due to manufacturing a hole inside hubs 4. Split coupling hub is available 5. Easy to assemble and disassemble 6. Low moment of inertia due to aluminum alloy material 7. 2 type sleeves(GR-55D, RD-64D) can be used 8. Absorbs vibration 9. Zero backlash