Conventional Lathes

Main characteristics All the gears and shafts of the headstock, feed Box and Apron are made of high quality steel, hardened and ground. Shafts are mounted on needle bearings lubricated oil bath.A well proportioned headstock enables high working capacity. The headstock is made from GG 25 casting, strongly ribbed, giving, and the machine more rigidity.The apron is completely enclosed. It is supplied with a safety device which prevents the screw cutting and feed mechanisms acting simultaneouslyYou have access are well proportioned and feeds without having to perform any change of gears in the machine's quadrant plate. Slides and carriages are well proportioned and move easily and smoothly. The cross slide and the top slide are equipped with adjustable cast iron taper gibesBoth the main electrical system (housed in an isolated cabinet), and the stop/start switch (centralized on the apron), are equipped with IP-44 protection.The tail stock is strongly built. The hardened and ground shank is provided with an extractor. The screw is mounted on bearings with high load capacity.Tapper roller bearing in head stock is used in back to back pairs so that axial sources can be supported equally in either direction.