5 Line 4 Digit Display 1 Phase And 3 Phase Multifunction Meter, 0-500v, Model Name/number: R-27a

Product Details of 1 Phase and 3 Phase Multifunction Meter are mentioned below. These products are prepared under the command of skillful personnel by making use of premium-class inputs.Product Details: MECO-G R-27 series multifunction network instruments can measure more than 50 electrical parameters in the electrical circuit It has 2-channel electrical energy pulse outputs, 4-channel switching value inputs and RS 485 communication output with modbus protocol 4 channel switching value output or 4 channel transmitting outputs are also available Technical Specification: INPUT NETWORK 3 Phase 3 Wire, 3 Phase 4 Wire Volts Rated Value AC 110V, 230V, 440 V Over Load Continuous : 1.2 times, Instantaneous : 2 times < 20s Consumption < 1 VA each Phase Impedance >500k Current Rated Value AC 1A, 5A Over load Continuous : 1.2 times, Instantaneous: 20 times < 1s Impedance < 20mΩ Frequency 45 - 65 Hz OUTPUT Output Mode Two channel open- collector optical coupling pulse output Electric Pulse Active 10000 imp/kwh Energy Constant Reactive 10000 imp/kvarh Start At rated voltage, reference frequency and the load current is more than 0.001 times in, can start and measure the electric energy continuously Communication Output mode RS 485, PROTOCOL MODBUS, RTU Baud Rate 1200, 2400, 4800, 9600 Analog Output Channels Four Channels output Mode 0-20mA, 4-20mA programmable Load Ability < 400 W Switching Value; Channels Four Channels Output Mode Normally open relay contact output Load Ability AC 240 V/ 1A Switching Value input Four dry contact input modes DISPLAY 7 SEGMENT BRIGHT RED LED DISPLAY, FIVE ROWS Kindly find attach file for Connection Diagram.