Flaker/ Drum Flaker /Drier, Automation Grade: Automatic

OUR Drum flakers are widely used to manufacture PVC ONE PACK STABILIZERS, POLYETHYLENE (PE) WAX ,TEXTILE SOFTNERS (CATIONIC & ANIONIC), GLYCERO MONO STEARATES (GMS), etc.The molten material to be flaked is poured on the tray of Flaker which get solidified on the surface of rotating drum which is scraped to get flakes of desired thickness. We manufacture Drum Flakers of various capacities depending on the production of flakes required viz 10 kg/h, to 3000 kg /houror higher capacities depending on the bulk density of material. STANDARD SIZES : SURFACE AREA OF 2 SQM, 3 SQ M, 4 SQ M, 5 SQ M , 10 SQ M IN MILD STEEL, STAINLESS STEEL 304 & 316, ALSO GMP CONSTRUCTION.Construction Drum Flaker/Drier consist of Drum fabricated from Mild Steelor Stainless steel with hollow shafts on both ends. The drumsurfaced is duly ground and hardcromed with superior finishto get uniform thickness of the flakes. The drum is providedwith a Hollow Shaft for entry of water for sprinkling on the inside of the drum for cooling purpose.The drum is mounted on selfaligning spherical roller bearing for smooth rotation and to take care of scraping loads. A jacketed feed tray isprovided below the drum in which molten material is poured, the molten material gets coated to the drum by a sizer pipe.The Scraping arrangement is made of Copper or Fibre Blades to scrape the flakes. A discharge tray is provided to collect the Flakes. Drive The Flaker drum/drier is driven by chain sprocket or Gear Pinion arrangement with Reduction Gear Box powered by Motor controlled by Variable Frequency drive. As per the needs and requirements of our clients, we are involved in providing Drum Flaker Mixer.