Dry Mix Mortar Plant

DRY MIX MORTAR PLANTS. Introduction: Dry Mix Mortar Plants designed for manufacturing a wide range of pre Mixed Mortars for Repairing, Water proofing, Tile Fixing, Waterproofing, plasters, Screeds, Grouts etc., Dry Mix Mortars are pre blended in a factory delivered to a site in bags and applied mechanically using special application technology or simply by hand. Dry mix mortars offer a number of advantages such as consistent product quality, customized logistics and planned inventory for the contractor/clients. Process: The process of manufacturing Dry Mix Mortars consists of Dosing, Weighing, Mixing and packing. Our plants are simple & economically designed keeping our clients best interests in mind. All materials are formulated using locally available raw materials as for as possible. The main raw materials i.e. cement, lime & silica sand are first dried, screened, weighed and conveyed to storage silos. From the silos each material is fed into the weigh batch hopper above the mixer as per the formulated weights. The material is then emptied in to the mixer. Special additives are added to the mixer by a dosing system and the mixer is then run for 2 minutes. After the mixing process the prepared material is emptied to a hopper of a packing machine. The product is then packed in 25 or 50 kgs bags. Product for which we offer formulations 1. Tile Glue 2. Repair Mortars. 3. Tile Grout 4. Non- Shrink Grout. 5. Pre Mixed Plaster6. Rebar Coat. 7. Water Proof Cement. 8. Brick laying Mortar 9. Polymer Mortar