Electric 400 kg/hr Pure Steam Generator

The large steam generator is a form of low water-content boiler, similar to a flash steam boiler. The usual construction is as a spiral coil of water-tube, arranged as a single, or monotube, coil. Circulation is once-through and pumped under pressure, as a forced-circulation boiler. The narrow-tube construction, without any large-diameter drums or tanks, means that they are safe from the effects of explosion, even if worked at high pressures. The pump flowrate is adjustable, according to the quantity of steam required at that time. The burner output is throttled to maintain a constant working temperature. NEELAM INDUSTRIES PSG: Pure Large Steam Generators are designed and constructed to produce clean/pure steam in full compliance with cGMP guidelines as per FDA and EMEA requirements. Pure steam applications Clean steam is defined as saturated steam produced from additive-free water, relatively free from non-condensable gases and dry, but not overheated. Pure steam is the same as clean steam, but when condensed it meets the USP and the EU Ph standards for WFI, which state that endotoxins level is typically below 0.25 Eu/ml. Clean steam should be used when the steam or resulting condensate comes into direct or indirect contact with any medical device or pharmaceutical product. Thus, it is the ideal heat transfer media for carrying out sterilization and/ or sanitization processes in autoclaves, tanks, reactors, pipe systems, etc. Operating principle Treated feed water (PW) is circulated through the degassing membrane to the evaporator column. This column is designed to have a large heat transfer area and large water-steam reservoir to provide efficient handling at peak consumption. The separator column diameter has been calculated to prevent water droplets and impurities entering the product steam. As an option, a small condenser can be installed for on-line monitoring of steam conductivity and taking samples. Control system The control system is based on a PLC wire operator supervision via a user-friendly touch-screen HMI with the following menu: Mimics of the equipment, showing the operational state in real time Process parameters (temperature, pressure and conductivity) Setting up of parameters Alarm information Start-up and alarm recognition. Options include: paper or electronic chart recorder for pure steam conductivity, temperature, extra feed water conductivity meter, online TOC monitoring. Compact and modular The generator is designed as a vertical column, with a special heat exchanger in the lower part (evaporator) and an expansion chamber above (separator column). The unit and all its components such as feed water pump, pre-heater, control panel, etc. are mounted on a stainless steel AISI 304 skid. All parts in contact with the media are made of stainless steel AISI 316L, insulated with mineral wool (asbestos-free material) with external cladding made of stainless steel AISI 304. Inner surfaces are polished to Ra 0.64 �m and electro polishing is optional. Applications: Pharmaceutical, Biotechnology, Hospital, Laboratory, Piping & Tank Sterilization Industries