Sculpfun S10 Laser Engraving Machine 10w for smart le cricket Bat engraving machine

Specification: Model: S10 Diode Laser Output Power: 10W (Note This Is Light Energy Not Electrical Energy) Inner Diameter Of Air Pipe: 7.5mm (Recommended To Use 30L/Min, 0.03mpa Air Compressor, Out Diameter Of Nozzle: 8mm) Laser Wavelength: 455±5nm Engraving Accuracy: 0.01mm Engraving Area Size: 410x400mm Focusing Method: Fixed Focus + Sliding Device Laser Protection Cover: Equipped With a Detachable Laser Cover To Protect The Eyes. You Can Adjust It Up And Down, Or Remove The Cover Machine Power Consumption: About 36W (Not Related To Engraving Or Cutting Performance, Just Power Consumption) Engraving/Cutting Materials: Engraving Material: All Kinds Of Wood (Including Walnut, Cherry And Other High Density Wood), MDF, Bamboo, Cardboard, Plastic, Leather, PCB Board, Alumina, 304 Stainless Steel, Ceramic, Dark Stone Cutting Material: All Kinds Of Wood (Including Walnut, Cherry And Other High-Density Wood), MDF, Acrylic, Cardboard, Bamboo, Some Plastic Boards, Leather, PCB Boards Laser Software: LASERGRBL, LIGHTBURN, LASERGRBL, LIGHTBURN, BENBOX, GRBLCONTROLLER, LITEFIRE Support System: Support MAC, Windows System Supported File Formats: NC, BMP, JPG, PNG, DXF And Other Image Formats Data Transfer Method: USB Connection Power Input: 100-240V AC, 50/60hz; Output: 12V 5A Product Weight: 3.42kg Packing Weight: 5.13kg/11.3lb Packing Size: 600 x 345 x 130mm/23.6 x 13.6 x 5.1in Notes: Because of the powerful laser of S10, it is forbidden to run the engraving machine unattended. Pause it if you're not around. For detailed machine instructions, please refer to the manual for parameter settings. When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles. Do not touch the laser with your hands, otherwise you may burn your hands. Please avoid strong impact on the machine. It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult attended. Do not use the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser. Packing List: 1 x X-Axis Assembly 2 x X Profiles 2 x Y Profiles 1 x Control Box Assembly 3 x Support Feet 1 x S10 Laser 1 x 12V 5A Power Adapter 1 x Power Cord 1 x USB Cable 1 x Air Tube 3 x Tool Bag 1 x Laser Goggles 1 x Test Wood Board 1 x A4 Size Metal Pad Step 1-6 Install The Package 1 x User Manual