Fosroc Conbextra EP10, Joint Width: Widths Of 0.25 To 10mm

Fosroc Conbextra EP10 High strength, low viscosity epoxy resin groutUses Provides a free flowing grout, for use where physical properties and chemical resistance of the hardened grout are of utmost importance. It is suitable for a wide range of heavy duty applications including : ! Underplate grouting to structural elements. ! Base plate grouting in dynamic load situations such as turbines and other reciprocating machinery. ! Heavy industrial applications in steelworks, refineries chemical plants and electroplating works. ! Structural infill where very high strength is required. ! Rail track applications, to support heavy cranes, or on transporter rails. Advantages ! Excellent durability - high compressive, flexural and tensile strengths ensure a long working life. ! Cost effective - high early strength gain promotes minimum downtime and early commissioning of plant. ! User friendly - simple, full pack mixing to ensure that the performance characteristics are achieved. ! Versatile - suitable for a wide range of loading situations including repetitive dynamic loads. ! Excellent in service performance - non-shrink capability ensures full surface to surface contact. Description Conbextra EP10 is a solvent free epoxy resin grout designed for grouting of gap widths of 0.25 to 10mm. It is an all liquid system consisting of base and hardener. The components are supplied in the correct mix proportions designed for whole pack mixing on site. Specification Where shown on the contract documents, the epoxy grout shall be Conbextra EP10 supplied by Fosroc. When tested at 7 days it shall provide compressive strength greater than 90, Tensile strength greater than 25 & Flexural strength greater than 60. It shall also provide good chemical resistance.