Fevicol AC Duct King Optima Adhesive

Low VOC synthetic rubber based adhesive to bond nitrile rubber in HVAC applications Description fevicaol AC duct king optima is a synthetic rubber based, low VOC product specially developed for various applications in HVAC industry. It is an excellent adhesive to bond Nitrile Rubber for insulating HVAC Ducts, Chilled Water Pipe lines and Underdeck for various industrial & residential projects. Recommended Application Area • HVAC Ducting - To bond Nitrile Rubber, EPDM (20 mm thickness max) to duct surface • Chilled Water piping - To bond Nitrile Rubber, EPDM (15 mm thickness max) to MS pipe lines • Acoustic insulation - To bond Nitrile Rubber, EPDM (20 mm thickness max) to concrete walls, vertical surfaces & duct lining • Under deck insulation - To bond Nitrile Rubber, EPDM (20 mm thickness max) to smooth concrete wall surface (mechanical fasteners are recommended for under deck insulation)Unique Features and Benefits • Low VOC product improves the IAQ • Mild smell does not cause any irritation to the occupants / applicators • Suitable for low ventilated areas • Very strong bonding ensuring zero reworking costs • Free from Carcinogenic compounds Recommended Method of Application • Ensure the substrates to be bonded are free from dust/rust/oil/moisture etc. • Stir the adhesive well before use to have a homogeneous material prior to application • Apply Fevicol AC Duct King Optima on both the substrates uniformly by spreader / brush. Use of spreader for flat non-porous insulation surface can help to improve coverage. • Once the adhesive becomes touch dry (when tack is developed), press both the substrates together ensuring uniform contact so that air pockets are not formed • Cure for 24 hrs at ambient temperature • For underdeck application, apply minimum two coats of adhesive on both the surfaces (if required, extra coats can be done depending on substrate porosity) Precautions & Limitations • Keep the container closed when not in use. Stir the adhesive well before use. • Contains flammable solvents, so precautions required in storing. • Adhesive or vapour from the adhesive should not come in contact with fire spots, naked flames or welding area on shop floor/work site. • Do not use the adhesive on undulated surface • Use of PPE's (protective hand gloves, mask & goggles) is strongly recommended MSDS is available on request.