Microcontroller Based Microprocessor Flame Photometer, 0 - 100 ppm
₹49,500.00
Specification
- mode
- General/Serum/Urine
- type
- Microcontroller Based
- brand
- Globe Scientific Instruments
- power
- 230V AC, 50 Hz
- weight
- 6.25 kg
- filters
- Narrow Bandwidth interference glass filters (Calcium and Lithium at extra cost)
- accuracy
- < 2% of FS
- atomizer
- Axial Flow Type
- detector
- Silicon Photodiode
- mobility
- Benchtop
- fuel type
- LPG
- i deal in
- New Only
- resolution
- 0.1 ppm / 0.1 meq.
- calibration
- Upto 5 Point Calibration
- gas control
- Controlled by Precision Regulator
- sensitivity
- +-5 ppm
- availability
- In Stock
- flame system
- LPG and Dry Oil Free Air
- determination
- General/Serum/Urine
- curve accuracy
- < 2% of FS
- ignition system
- Auto Ignition
- reproducibility
- < 1% coefficient of variation for 20 consecutive samples using 10 ppm Na set as Maximum Standard
- measuremet range
- 0 - 100 ppm
- wavelength range
- 0-100 ppm and upto 250 meq/l
- country of origin
- Made in India
- model name number
- 1600-G
- usage application
- Soil Applications
- displayed resolution
- 128x64 Graphical LCD with Backlit
Add Quantity
Response within 4 hoursFree to enquire
Description
Globe Scientific Instruments Microprocessor Flame Photometers 1600-G comes with Flame Failure detection and Auto Gas Cutoff Facility. In case of power failure, the gas cuts off automatically. In case the flame goes off accidently during work, the flame failure alarm sounds after a few seconds.Microprocessor Flame Photometer 1600-G are used for the determination of Sodium, Potassium, Calcium, Lithium & Barium. They use the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. They have soft touch membrane keys for ease of operation. The solution is aspirated through an atomizer. Air, sample and the fuel are mixed in the mixing chamber which is then sprayed as a very fine mist into the flame. Radiations from the flame passes through specific narrow band interference filter and pass to the photo-detector. The final results are displayed on the 128 x 64 alphanumeric LCD. The standard model comes with 2 filters (Na, K). Additional filters Ca & Li are optional at extra cost.A photoelectric flame photometer is a device used in inorganic chemical analysis to determine the concentration of certain metal ions.
Verify supplier credentials before transacting. Enquiries create leads for the supplier.