Reynoarch 3t 325 Grey

TAC 3T 325HIGH STRENGTH POLYMER BASED TILE ADHESIVEFAB (Features, Benefits & Advantages)High Polymer based thin set adhesive for both Internal & External Floor & WallFor installation of ceramic/clay/vitrified/basalt/ and porcelain / all natural stone tiles Good underwater shear bond allows this productbe to used for wet areas like swimming pools, sauna, water bodies and washroomsTo install tiles on to various substrates like: Concrete Masonry, VDF / Trimix Concrete, Cement Mortar Beds, Cement Plaster, Existing Vitrified Tile & Ceramic Tile, Brick Masonry, Cement Terrazzo and Existing Natural StoneCoverageApprox. 45 to 50 sq.ft. per 20 Kg pack, using 6mm x 6mm using square notched trowel for a bed of 3mm Coverage will depend on the nature and flatness of the surface and the method of application For good coverage, it is must that all surfaces are smooth, plumb, level and free from defects and undulationsWorking Properties at 27° CTAC 3T 325 Adhesive mixed with WaterOpen Time20 minutesPot Life3-4 hoursTime to Heavy Traffic16-24 hoursActual performance will depend on installation methods and side conductionTechnical dataIS DataProperty: Test methodRequirementTypical ValuesTensile AdhesionDry Condition- Annex A (Clause 5.1)Minimum 1..5 N/mm²1.8-2 N/mm²Wet Conditions Annex A (Clause5.1)Minimum 1.00 N/mm²1.2-1.3N/mm² Shear AdhesionDry Conditions Annex B (Clause 5.2)Minimum 1..5 N/mm²1.7-1.8N/mm²Heat Ageing Annex B (Clause 5.2)Minimum 1.00 N/mm²1.2-1.3N/mmWet Conditions Annex B (Clause 5.2).Minimum 1.00 N/mm²1.25-1.35 N/mm²Slip ResistanceSipresistance Annex E(Clause 5.5)$0.5mm0.40-0.45 mmStandardTAC 3T 325 complies to IS 15477:2019,CML No. 8400211808 “Type 3T” Also complies with EN C2TE classfication