Fly Ask Brick Machine

Fly ash brick (FAB) is a building material, specifically masonry units, containing class C or class F fly ash and water. Compressed at 28 MPa (272 atm) and cured for 24 hours in a 66 °C steam bath, then toughened with an air entrainment agent, the bricks can last for more than 100 freeze-thaw cycles.Fly ash bricks absorb less heat and considering the Indian climate, it makes it better when compared to clay bricks. From the cost front, it requires less mortar during construction. Further, the machine that we provide requires less labor too.FlyAsh produced at Coal based ThermalPowerPlant, is a resource material for Cement industry and building products manufacturing units. It is also being used as one of construction material in Road and Fly over embankment construction and thus helping to save earth and degradation of good agricultural land.Depending upon the source and composition of the coal being burned, the components of fly ash vary considerably, but all fly ash includes substantial amounts of silicon dioxide (SiO2) (both amorphous and crystalline), aluminium oxide (Al2O3) and calcium oxide (CaO), the main mineral compounds in coal-bearing rock,