Mild Steel Rectangular Asian Cone Calorimeter

We are prominent manufacturers, Suppliers & exporters of high-quality Asian Cone Calorimeter from Delhi-NCR, India. Asian Cone Calorimeter is used for the determination of the fire behavior of the various samples in the solid state. The Cone Calorimeter Device is used to collect information of the various parameters associated with the burning characteristics such as ignition time, mass loss, combustion products, heat release rate etc. of various samples.The test method is based on the observation that, generally, the net heat of combustion is proportional to the amount of oxygen required for combustion. The relationship is that approximately 13,1 × 103 kJ of heat is released per kilogram of oxygen consumed. Specimens in the test are burned under ambient air conditions while being subjected to a predetermined external irradiance within the range of 0 kWm−2 to 75 kW m−2 and measurements are made of oxygen concentrations and exhaust gas flow rates. Asian Cone calorimeter is manufactured considering the Client requirements & by using high-quality materialTechnical Data: Cone-shaped radiant electrical heater: 5 000 W at 230 VAC Irradiance control: PID type up to 10000C Weighing device: 1000 GM X 0.1 GM least count Ignition circuit: spark plug powered from a 10 kV transformer Oxygen analyzer: paramagnetic type, with a range of at least 0 % oxygen to 25 % oxygen Heat flux meters: up to (100 ± 10) kW m−2 Calibration burner: square orifice with an area of (500 ± 100) mm2 Data collection and analysis system: NI software Related Standards BS ISO 5660-1:2015 ISO 5660-1:2015(E)