Automatic 1 L Jerry Can Making M/C
₹25,67,000.00
Specification
- dry cycle pcs h
- 800*2
- clamping force kn
- 38
- screw diameter mm
- 60
- mold open stroke mm
- 138~368
- output of hdpe kg h
- 50~70
- screw l d ratio l d
- 24~26
- size of mold w h mm
- 300*320
- weight of machine t
- 4
- blowing pressure mpa
- 0.6~0.8
- max product volume l
- 2L
- screw motor power kw
- 15
- air consumption m3 min
- 0.4
- number of heating zone
- 3
- die heating capacity kw
- 2.8~3.5
- oil pump motor power kw
- 7.5
- size of machine l w h m
- 3*2*2.1
- water consumption l min
- 50
- max die mouth diameter mm
- 90
- screw heating capacity kw
- 3.3~4.5
- cooling water pressure mpa
- 0.3
- recommended order quantity
- 1 Piece
Add Quantity
Response within 4 hoursFree to enquire
Description
The screw adopts high potency melt to make sure the material well mixed.Adopt frequency control of motor system to reduce the power consumption.Adopt horizontal movement frame to improve stability and speed.The oil cylinder is in the center of the mold board, uniform stress for quality products and increase life time.High stench guild rod controller the mold open and clamp, to enhance the steadily and high efficiency. The extrusion head use spreader or screw type to well mixed the thickness and easy to change different color. Advanced design to eliminate the melt material degrade in the runner, to avoid the perform draw-down and the welding line.The precise time control system assured good quality, suitable weight and reduces production cycle. Freely to move the extrusion foundation backward or forward to make the exchange of the mold easy. Multi-function bottom blowing type for shaped products.The mechanical arm can take out the product automatically.
Verify supplier credentials before transacting. Enquiries create leads for the supplier.