Sensil Anabond Epoxy Adhesives, Bucket, Packaging Size: 20 ml

Definition Epoxy adhesive are regarded as the strongest adhesive available and have wide industrial use as structural (load bearing) adhesives. These are thermosetting adhesives, which solidify through chemical reactions. These chemical reactions take place either at room temperature or at elevated temperatures. These chemically reacted and solidified epoxy materials will only soften but do not melt on heating. Applications Bonding, gap filing, Potting and encapsulation. Product types One component epoxy adhesive system: It contains an epoxy resin & a latent curing agent. Latent curing agents are inactive at room temperature and active at high temperature. When one component epoxy adhesive system is heated to high temperature, the chemical reaction between the resin and the hardener starts and the material gets cured in to a tough mass exhibiting high bonding strength. Two component epoxy adhesive system: These are room temperature curing systems. Epoxy resin and the hardener are packed separately and supplied as a package to the customer. These two are mixed in particular ratios (Weight or volume basis) during use. The mixed adhesive system is used within the potlife period to achieve optimum bonding strength. The complete curing of two part epoxy adhesive systems require a minimum of 5 – 7 days. Packing, storing, shelf life and transport One component system: 350g, 450g in plastic cartridges and packing sizes vary from 1kg to 20kg packed in HDPE container/plastic pails, coated metal tin and metal drums. Store the products at or below 5 ºC. Shelf life: Six months. Two component system: Available packing sizes vary from 1kg to 7.5kg (Based on the mixing ratio) and packed in HDPE containers/plastic pails. Store the products at or below room temperature. Shelf life: 12 months. One Component epoxy adhesive system Features Limitations No need of mixing and weighingRequires cold storageGood mechanical and electrical propertiesLimited shelf lifeGood chemical resistance properties Service temperature is high (+ 40 °C to 150 °C) Good weathering properties Two Component epoxy adhesive system FeaturesLimitationsVersatile (wide range of formulations possible)Exothermic reactions (unsuitable for certain plastics)High cohesive strengthRequires exact measuring and mixing to achieve optimum bonding strength High adhesion to wide variety of substrates Short working timeGood temperature and solvent resistance (service temperature range - 55 °C to + 80 °C) Probability of skin irritation due to the toxic nature of the curing agent Good gap filling General grades One component adhesives: Anabond 220, 221, 223, 224, 225, 226, 227, 229, 235, 236, 240W, 244, 251I, 251HT, 252, 253, 254, 257, 264, 271S, 271, and 273 Two component adhesives: Anaoxy 101, Anaseal, Anabond 4 minutes steel epoxy, Anabond 502, 513, 552, 556, 566, 540, 530, 540 Grey, 540 Brown, 560, Aquabond 510 and 520