Weiber Air To Air Thermal Shock Test Chamber- Three Zone

To observe the product characteristics and failure occurrences caused by different materials and their thermal expansion coefficients, thermal shock testing is subjected to the product. In thermal shock testing alternating high and low temperatures are fed in the chamber. WEIBER designs and manufactures customised THERMAL SHOCK TEST CHAMBER with separately controlled temperature zones (2 zone and 3 zone), depending on configuration of the chamber chosen. WEIBER offers several configurations of thermal shock chambers capable of meeting a wide variety of testing needs: 3 Zone: Three zone thermal shock test chamber utilizes controlled areas for hot, ambient and cold temperatures. The product is moved from ambient to hot or ambient to cold zones. The chamber can be programmed to include a dwell period in the ambient zone if desired. Operating Principle: In case of air to air chamber the heated air and cooled air are used 3 Zone: Sample is placed in the test chamber at higher temperature than test temperature, in high-temperature chamber and low-temperature chamber. Rather than only hot and cold temperature the specimen flows between hot, ambient, and cold zones. When converted into high-temperature test, cold chamber and ambient chamber door is closed, hot chamberdoors are opened, and test chamber works. When it comes to low temperaturetest, cold chamber door open, and low-temperature chamber works. When it comes to ambient chamber temperature test, ambient chamber door open, and ambient-temperature chamber works. Special Features: Horizontal airflow design assures uniform results Temperature recorder provides24 hour part temperature recording as the load travelsfrom zone to zone. Smooth transfer of specimen Three levels of overheat protection and 2 levels of overcooled protection Microprocessor temperature/humidity programmer. Computer communications, networking, data-logging software. Colour touch panel. HMI+PLC in one unit Door open and Door close alarm system. Inbuilt calibration system. Separate Inbuilt printer for printing graphs(optional).