Oil MULTIDRAW WIRE DRAWING TDR- 500, 550

DESCRIPTION TDR-500 was developed in mineral lubricant especially for use as a lubricant for drawing aluminum. It can be used neat and these lubricants do not interfere with coating. TDR-550 (synthetic) is a partly synthetic lubricant specially intended for the wire drawing, deep drawing and die-cutting of steels, including stainless steel. By using it in progressive dies one can achieve splendid result with a slight impregnation of belt, which minimizes the consumption rates .It protects the equipment against wear and corrosion very effective and it can be easily removed by solvents and alkaline detergent in the hot. This dramatically lowers the coefficient of friction of steel to aluminum, aluminum to aluminum and can also be used on stainless steel, bronze, brass, galvanized steel, titanium and other metals. APPLICATIONS & USAGE Before TDR-500 is charged into a system, machines should be thoroughly cleaned. In order to obtain optimum results from TDR-500, the system must be kept free of moisture. Before TDR-550 is applied by dripping, recirculation, and impregnation with rollers or belt. It is used for deep drawing of all kind of steel wires also. (MOISTURE INCREASES DIE WEAR AND GIVES A POOR SURFACE FINIS--H). Sump temperatures are regulated at 120°F ± 10°F (49± 5 oC). At no time should the temperature be allowed to drop below 85°F (29.4oC) or exceed 150°F (66.0oC). FEATURES & BENEFITS  High oxidation stability.  It provides excellent lubricity  Excellent wear protection.  No corrosion.  Good surface finish