Steel Toe Impact Tester, Display Type: Digital, Capacity: 750 J

Steel toe impact tester.Safety Footwear Impact Tester is to test safety shoe toe cap impact resistance ability by impacting safety shoe toe cap with certain energy. Safety shoe impact test methods include ISO 20344, EN 12568, ANSI Z41 and etc. 1. Safety Shoe Impact Tester Principle This Impact Tester is equipped with a steel striker in the required mass. When release striker, it would drop down freely on the vertical guides from a certain height to give certain impact energy. With mechanism provision to catch the striker after the first strike to ensure the toe cap would be hit for only once. Alarm before the striker falls down. 2. Toe Cap Impact Test Procedure Mount the specimen in the impact tester and make sure the striker would hit it in a certain position as per standard. Then release the striker from a certain height and give required energy. 3. Unuo Toe Cap Impact Tester Features Impact height can be set according to your requirements; Automatically lift the striker to a pre-determined height; Photoelectric switch to detect the speed; With emergency stop function; With Safety Cover. Model FT-02A（ISO） FT-02B（ASTM） Impact Height 0- 1500mm Impact Energy 0~200±2 J 0~100±2 (101.75)J Striker Wedge, Length 75mm,Angle 90° Cylinder，Length 50.8±3.2 mm， Diameter 25.4mm Striker Size Corner radius R3 mm Diameter 25.4mm Striker Mass 20±0.2 kg 22.7±0.23kg Power 1∮AC220V 50HZ 5A Size (L x W x H) 60 x 70 x 220cm Weight 240kg Standards ANSI-Z41, BS EN-344, CSA-Z195, ISO-20344, LD-50, EN ISO 20344:2004, LD50-1994, ASTM F2412-11, EN12568-2010, CNS 6863-82, B 4014-1983, JIS-T8101:2000