Inconel 617 Plate

A nickel-chromium-cobalt-molybdenum alloy with an exceptional combination of metallurgical stability, strength and oxidation resistance at high temperatures. Resistance to oxidation is enhanced by an aluminum addition. Thealloy also resists a wide range of corrosive aqueous environments. Used in gas turbines for combustion cans, ducting and transition liners; petrochemical processing; heat-treating equipment; and in nitric acid production.STANDARD PRODUCT FORMSPipe, tube, sheet, strip, plate, round bar, flat bar, forgingstock, hexagon, wire and extruded section.MAJOR SPECIFICATIONSUNS N06617ASTM B 166, B 168, B 546,B 564ASME SB-166, SB-168, SB-546,SB-564SAE AMS 5887 – 5889ASME Code Cases 1956,1982Werkstoff Nr. 2.4663aVdTÜV 485ISO 6207, 6208, 9724DIN 17744, 17750-17754LIMITING CHEMICAL COMPOSITION, %Ni...........44.5 min.Cr.......20.0 – 24.0Co......10.0 – 15.0Mo....... 8.0 – 10.0Al............0.8 – 1.5C........0.05 – 0.15Fe........... 3.0 max.Mn.......... 1.0 max.Si............ 1.0 max.S........ 0.015 max.Ti............ 0.6 max.Cu.......... 0.5 max.B........ 0.006 max.PHYSICAL CONSTANTS AND THERMAL PROPERTIESDensity, Ib/in3.........................................................................0.302g/cm3......................................................................... 8.36Melting Range, °F....................................................2430 – 2510°C....................................................1330 – 1380Specific Heat, Btu/lb•°F.....................................................0.100J/kg•°C............................................................ 419Coefficient of Expansion, 78 – 200°F, 10-6 in/in •°F........6.420 – 100°C, μm/m •°C.......... 11.6Thermal Conductivity, Btu • in/ft2•h•°F...............................94W/m •°C........................................... 13.6Electrical Resistivity, ohm •circ mil/ft................................ 736μΩ•m................................................. 1.22TYPICAL MECHANICAL PROPERTIES