50-400 Sq.MM Raychem 11KV UE Cold Applied Boots

's Raychem heat-shrink insulating boots are moulded parts, that fit over the connection between a termination's cable lug and an equipment bushing, to provide phase-to-phase and phase-to-ground insulation. They are used in switchgear and transformer cable boxes, where air clearances are insufficient for normal operation, and they also protect against flashover caused by rodents or high humidity. The non-tracking heat-shrink material has excellent erosion resistance, dielectric properties and environmental resistance, giving superb performance in areas of high humidity and electrical stress. TE's Raychem RSRB boots can be used with all TE's Raychem heatshrink terminations and are quick and easy to install.RSRB-4022 17.5 10 – 35 Inline connection DIN, CENELEC, ANSI n/a RSRB-4024 17.5 50 – 95 Inline connection DIN, CENELEC, ANSI n/a RSRB-4026 17.5 120 – 300 Inline connection DIN, CENELEC, ANSI n/a RSRB-4042 17.5 10 – 35 Elbow connection DIN, CENELEC, ANSI 90 - 130 RSRB-4044 17.5 50 – 95 Elbow connection DIN, CENELEC, ANSI 90 - 130 RSRB-4046 17.5 120 – 300 Elbow connection DIN, CENELEC, ANSI 90 - 130 RSRB-4062 17.5 10 – 35 Elbow connection DIN, CENELEC, ANSI 60 - 90 RSRB-4064 17.5 50 – 95 Elbow connection DIN, CENELEC, ANSI 60 - 90 RSRB-4066 17.5 120 – 300 Elbow connection DIN, CENELEC, ANSI 60 - 90 RSRB-5044 24 50 – 95 Elbow connection DIN, CENELEC, ANSI 90 - 130 RSRB-5046 24 120 – 300 Elbow connection DIN, CENELEC, ANSI 90 - 130 RSRB-6046 36 120 – 300 Elbow connection DIN, CENELEC, ANSI 90 - 130