Ingot Casting Machine

Ingot casting conveyor:Arihant Engineers Ingot Casting machine has been developed to give trouble free production of Aluminum /Lead/Zinc and its alloy. Metal is poured from the furnace in to the casting wheel/Tundish and the system accurately controls the volume of metal in to each mould. The filled moulds travel up the incline , where they are water cooled. As the molds pass around the head sprocket , they invert , allowing the ingots to fall by gravity- assisted by two knock out hammer. Specification:Mould typeAs per customer requirementMold DimensionsDepends on aboveNumber of moldsvaries from 60 to 240 ( most popular sizes are 120,130 & 150 mold casting machine)Mould materialHermatite cast iron, material spec 420/12 To BS2789:1985Production rate2 to 7 ton per hour for Aluminum and 8 to 24 tons per hour for leadMould coolingWater spray , 9 spray heads, Total water consumption At 2 bar pressure 100 Its per hourKnock out systemAutomatic dual Knock out system operated by solenoid valvePouring systemCasting wheel/ Cam operated tundish , Drive off main chainDrive Motor3/5 HP AC variable frequency driveGear box500:1 double reduction worm gearConveyor chain150/160 mm pitch bolted assemblyMachine inclination13 degreeMachine constructionRobust frame fully welded Construction . Frame is made Out of 250 x100 mm C channelOverall dimensionAs per machine size normally between 6 to 20 meterSafety featureEmergency stop on both side