Dark Brown Enifix 550 Insulation Adhesive, 30 Litre

ENIFIX 550 is a premium quality, one component contact adhesive based on polychloroprene rubber. ENIFIX 550 is specially formulated for stress bonding of nitrile rubber & XLPE insulation material. ENIFIX 550 is made from a combination of special resins & additives that produce low odor and provide excellent tack properties along with a very strong bond. ENIFIX 550 has the following features: Excellent adhesion and high bonding strength Excellent bonding to porous and non-porous surfaces Suitable for material under tension Usable both indoors and outdoors Excellent heat resistance Chemical resistant Excellent tack Low odor Recommended Applications ENIFIX 550 is used for air duct insulation, pipe applications, under deck (metal, concrete) and over deck insulation installation. ENIFIX 550 is an ideal product for bonding: NBR Insulation to GI XLPE Insulation to GI NBR Insulation to MS Pipe XLPE Insulation to MS Pipe NBR Insulation in Underdeck XLPE Insulation in Underdeck Nitrile & EPDM Rubber Insulation Closed Cell & PE Cross Link Foam Insulation System Conforms To ??? Free of asbestos, lead and mercury compounds Surface Preparation: The surface should be structurally sound, clean, dry, levelled, and free from dust, curing compounds, grease and other loose debris. Keep container closed when not in use. Application Procedure: Apply ENIFIX 550 evenly with a brush or roller. Allow the surface to become tacky & dry. After the evaporation of the solvent in adhesive, assemble the surface by applying normal hand pressure. Special care must be taken on the edges and adhesive must be evenly applied. If the material is porous, apply a second coat of ENIFIX 550 and let it dry. Note: The adhesive and the parts to be bonded must be at room temperature for optimum results (do not use below 10°C). The relative humidity must be below 65% to avoid formation of bubbles in the final product. The final bonding strength will depend on the pressure applied. Therefore, press across the entire surface as firmly as possible. Packaging: 5 Ltr Tin | 30 Ltr Metal Drum Shelf Life: 12 months from date of manufacturing in original unopened containers. Storage: Store product (10oC - 30 oC) for maximum storage life. Higher temperatures reduce normal storage life. Lower temperatures may cause increased viscosity of a temporary nature. Rotate stock on a "first in-first out" basis. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. Cleaning: Clean tools immediately after use with thinner. Immediately remove any adhesive from the surface of the floor covering with a damp cloth soaked in thinner. Health & Safety: As with all chemicals, caution should always be exercised. Consult Material Safety Data Sheet and container label for further information.