Enifix 525 XLPE Insulation Adhesive, 25 Litre, Drum

Description ENIFIX 525 is a one component adhesive developed specially for XLPE, NBR, Nitrile & EPDM rubber insulation material. It is ideal for Closed Cell & PE Cross Link Foam Insulation System. ENIFIX 525 is made from a combination of special resins & additives that produce an extremely low odor and provides excellent tack properties along with a very strong bond. Excellent Bonding to Porous & Non-Porous Surfaces ▪ Quick Drying and Setting Time ▪ Excellent Heat Resistance ▪ Extremely Low Odor ▪ Chemical Resistant ▪ Excellent Tack ▪ UV ResistantRecommended Applications ENIFIX 525 is used for air duct insulation, pipe sections, slabs, under deck (metal, concrete), etc. ENIFIX 525 is an ideal product for bonding: XLPE Insulation to GI Bonding NBR Insulation to MS Pipe Bonding XLPE Insulation to MS Pipe Bonding NBR Insulation in Underdeck Bonding XLPE Insulation in Underdeck Nitrile & EPDM Rubber Insulation Closed Cell & PE Cross Link Foam Insulation System.Surface Preparation: The surface to be bonded should be structurally sound, clean, dry, leveled and free from dust, curing compounds, grease and other loose debris. Keep container closed when not in use. Application Procedure: Apply ENIFIX 525 evenly on both surfaces using a brush or roller. Allow the surface to become tacky & dry. After both surfaces are dry, bring them together and join by applying normal pressure. Storage: Store product (10o C - 30o C) for maximum storage life. Higher temperatures reduce normal storage life. Lower temperatures may cause increased viscosity of a temporary nature. Rotate stock on a "first in-first out" basis. Cleaning: Clean tools immediately after use with thinner. Immediately remove any adhesive from the surface of the floor covering with a damp cloth soaked in thinner.Health & Safety: Consult Material Safety Data Sheet and container label for further information.Enifix 525 XLPE Insulation AdhesiveEnifix 525 XLPE Insulation AdhesiveEnifix 525 XLPE Insulation Adhesive