THK Linear Bush

Since an ordinary circular flange is integrated with the nut, this model can easily be mounted.Circular Flange Model LMIFSince the fitted part is short, the linear bushing tends not to protrude into the other side, so space is saved on the side opposite the mounting.Circular Flange Model LMCF-LSince an LMIF flange is installed in the center for this type and and work can be attached close to the center of the linear bushing unit, both load and space are distributed on both sides of the flange in a balanced manner.This is a good solution for when you want to make the stroke equal on the left and right.Square Flange Model LMKBased on model LMF, this type has a square flange. Since the height is lower than the circular flange type, compact design is allowed.Lightweight Flanged Type (Square) Model LMJKSquare Flange Model LMIKSince the fitted part is short, the linear bushing tends not to protrude into the other side, so space is saved on the side opposite the mounting.Square Flange Model LMCK-LLike model LMCF-L, this type also has a fl ange, but the flange is cut to a square shape. The height is lower than the circular flange type, allowing a compact design.Cut Flange Model LMHSince an oval flange is integrated with the nut, a lower core height and more compact design than model LMK are achieved.Cut Flange Model LMIHSince the fitted part is short, the linear bushing tends not to protrude into the other side, so space is saved on the side opposite the mounting.Cut Flange Model LMCH-LThis type features a flange cut into an ovular shape. The height is lower than Model LMCF-L, allowing a compact design. Because the rows of Linear Bushing balls are arranged such that fl at loads are borne in two rows, superior lifetime is achieved.