Automatic Melting Point Apparatus Thermocol 100 Analab Make, Capacity: 50-300 C

Technical Specification : Detection Principal : Automatic by photocellTemperature Range : 5ºC Above Ambient to 400ºCHeating Rates : 0.1 to 10.0ºC/min (Increment of 0.1ºC)Detection of Melting :a) Melting Pointb) Melting Rangec) % Level of Melting Point between Melting RangeOven Controller : Microcontroller BasedTemperature Resolution : 1.0 / 0.1 ºC - SelectableCalibration : Multi Point Calibration Standard - as per Pharmacopia or any users known standard.Max. Heating Time : Less then 10 Minutes from 50ºC to 350ºCMax. Cooling Time : Less then 10 Minutes from 350ºC to 50ºCMelting Capillary : Three Capillary ( Three Channel )Accuracy of Temp.:Ambient +10ºC to 100ºC………… ± 0.2ºC.101ºC to 200ºC …………. ± 0.4ºC.200ºto 350ºC …………….. ± 0.5ºC.Sample : Borosilicate Capillary Tube One End Sealed OD : 1.4 to 1.6 mmID : 1.0mmLength : 100mmFilling Height : 3 mmTemperature Sensor : PT-100Data Storage as per GLP : Non Volatile Memory with More than 300 analysis data storage with corresponding calibration data with Batch / ID Number, Real Date & Time for Validation, Operator Name, Sample Name, searching of data as per Record Number.Program Storage : 20 User methods parameter with Add/Edit Facility.Printer Output : Parallel Port for Dot Matrix Printer AttachmentComputer Interface : Serial Port & USBRS-232 to USB Interface with Cable & Driver Software to Transfer Data From Inst. to PCKeyboard : Alphanumeric Polyester SoftkeysDisplay : 20 x 4 Line Alphanumeric Backlit LCDPower : 230 VAC ± 10%, 50HzOptional Camera attachment