Fully Thyristorised Co2/ Mig Welding Machine, Output Current: 250 Amp, Phase: 3 Phase

Power plus brand power Source Fully Thyristorized CO2/MIG welding machine-- full wave with voltage range of as low as 5 volts to the rated capacity. Efficiency levels of more than 90% with no load loss less than 0.7 Amps. 100% for electrolytic cooper winding ensures long life of power sourceWelding Current & Voltage can be controlled even during welding with a lightweight Remote Control Unit for easy operation and better productivityExtremely smooth and instantaneous arc striking facility. in-built with start signal. Stable and constant arc length in spite of welder's uneven hand movement or change of feeder wire - reduced dependence on welder's skill.The fresh tip treatment and fresh arc start system eliminates globular formation at the end of the wirePre-flow/Post-flow of shielding gas with burn-back control, ensures non-contamination of the weld pool and crater-crack formation of the weld end respectively, with the help of self- hold circuitry and crater control module. It also makes the power source compatible for use with any suitable shielding gas or gas mixtures.Plug-in type PCBs are housed in an additional steel enclosure for protection and prevention against any damage. The MCW Power Source is ideally suited for solid, flux-cored and self-shielding wiresThe MCW Power Source is robust, rugged yet light in weight -- ideally suited for both indoor / site applications.Digital type Ammeter and Volt Meter are mounted on the front panelProvided with handle bar and the hook on the topOuter casing is powder-coated Wire Feeder Euro Plug Type mechanism is robust and maintenance-free, yet light in weight for easy manoeuvrability. Drive system with 4-Roll drives made in alloy steel and case-hardened Suitable for 250, 300, 400 and 600 Amps for use of 0.8, 1.2 & 1.6mm filler wires.Thyristorised stepless control with feedback system for constant output speed and welding of smooth quality and finishPush buttons for wire inching and gas checkingQuick release device for easy changeover of wire spools for enhanced productivity with 5 m long connecting control cable..