Inconel 600 Round Bar And Rod

The Inconel 600 Round Bar has 72% nickel, 14% chromium, iron, carbon, manganese, sulfur, silicon and copper in the composition. The material has high melting point of 1413 degrees Celsius. The ASTM B166 UNS N06600 Bar has 310MPa minimum yield strength and 655MPa minimum tensile strength. The material has good oxidation resistance even in elevated temperatures. The corrosion resistance against organic and inorganic acids of the Inconel 600 Rod is very high so it is used in chemical processing industries as well. The material has resistance to chloride ion stress corrosion cracking as well. The specification and the standards cover the bars of 3mm to 800mm in diameter with lengths varying up to 6000mm. The Alloy 600 Hex Bar can be hot rolled, cold drawn, cold drawn or forged. The applications include nuclear power plants, nuclear reactors, heat treat furnace applications and gas turbine components as well. The Inconel 600 Flat Bar and other bars can also be used in electronic parts and jet engine applications. Please feel free to contact us for more information on the 600 Inconel Square Bar and other bar types with a complete price list. International Specifications BS 3072-3076 (NA14) DIN 17742, DIN 17750, DIN 17754 WERKSTOFF Nr 2.4816 TÜV 305 AFNOR-NC 15 Fe Grade Inconel 600 – UNS N06600, Nickel Alloy 600 Specification ASTM B166 UNS N06600, AMS 5665 Flat bar size Thickness: 2 -100mm Width: 10 to 500mm Square bar size 4 to 100mm Round bar size Diameter: 3-~800mm Hex Bar size 2-100mm A/F Channel Bar 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness Hollow Bar 32mm OD x 16mm ID to 250mm OD x 200mm ID) Angle bar size 3mm*20mm*20mm~12mm*100mm*100mm Section 3.0 to 12.0mm thickness Rectangles Size 33 x 30mm to 295 x 1066mm Billet Size 1/2″ to 495mm Diameter Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black Condition Hardened & tempered, annealed Technique 600 Inconel Cold Drawn, Hot Rolled, Forged Round Bar, Rod, Cold Rolled Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements Surface Cold Drawn, Bright, Sand Blasting Finished, Hot Rolled Pickled, Hairline, Polished Processing Bar cutting to 650mm Form Precision Ground Bar, Flat Bar, Square, Round, Half Round Bar, Rod, Rectangle, Hex (A/F), T-Bar, Channel Bar,Blocks, Round Rod, Threaded, Profiles, Billet, Ingot, I/H Bar, Forging, Rings, Hollow, Triangle etc. Our 600 Inconel Round bar conforms to NACE MR0175/ISO 15156