Leadshine EM542S Microstepping Drive
₹8,500.00
Specification
- brand
- Leadshine
- phase
- 2
- weight
- 0.25 kg
- model no
- EM542S
- dimension
- 2.5 cm
- vibration
- 5.9 m/s2 Max
- control mode
- Step & Direction
- communication type
- RS232 for tuning
- ambient temperature
- 0 - 50 Deg C
- input voltage range
- 20 - 50 VDC
- logic current range
- Max. 16 mA (10mA typical)
- max input frequency
- 200 KHz
- isolation resistance
- 500 Mohm
- operating temperature
- +70 Deg C Max
- idle current percentage
- 90%
- dip switch resolution settings
- Max. 25000
- software cofig resolution range
- Max. 512,000 (increased by 200)
- dip switch current configurations
- 1.0A,1.5A,1.9A,2.4A,2.8A,3.3A,3.8A,4.2A
- suggested power supply voltage range
- Max. 48 VDC
Add Quantity
Response within 4 hoursFree to enquire
Description
Step & direction (PUL/DIR) or CW/CCW (double pulse) control 20-50VDC supply voltage 200 KHz max pulse input frequency 5V / 24V control signal voltage setting by DIP switch, default is 24V 16 micro step settings of 200-25,600 via DIP switches, or 200-51,200 via software (increase by 200) 8 output current settings of 1.0-4.2A via DIP switches, or 0.5-4.2A via software Configurable control command smoothing time to reduce motor vibration Automatic idle current reduction to 50% or 90% Convenient self-test for easy diagnosis Automatic self-configuration to match wide-range NEMA 17, 23, and 24 stepper motors Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise Soft-start with no "jump" when powered on Optically isolated inputs Fault output and Barke output Over-voltage and over-current protections CE certified and RoHS compliant
Verify supplier credentials before transacting. Enquiries create leads for the supplier.