Airro Engineering Automatic PSA Nitrogen Gas Generators, for Industrial

Nitrogen Gas Generators produces Nitrogen gas from atmospheric air by PSA (Pressure Swing Adsorption) Technology. PSA Technique is a simple & reliable process of separation of Nitrogen from compressed atmospheric air by adsorption of oxygen over a bed of Carbon Molecular Sieves (CMS). CMS is an adsorbent having infinite number of small pores. The diameter of the �Bottle Necks� is in the same range as those of the molecules. Thus when CMS is used in the PSA process, an Oxygen Molecule, having a smaller diameter than a Nitrogen molecule traps in to the pores. Therefore the Nitrogen is recovered to a high degree while almost all the oxygen is adsorbed. Selection of models: MODEL - MSU MODEL � PDC MODEL - CUC TYPE N2 direct from PSA Module N2 from PSA further purified in Palladium Catalyst based De-Oxo Unit And dried in Gas Dryer. N2 from PSA further purified in Copper based De-Oxo Unit And dried in Gas Dryer. OXYGEN 5 � 0.01% 1 PPM 1 PPM HYDROGEN NIL 0.5 � 5.0% NIL NITROGEN 95 � 99.99% 99.9999% 99.9999% ATM. DEW POINT ( 0C) (-)40 TO (-)60 (-)40 TO (-)80 (-)40 TO (-)80 APPLICATIONS As Inert Gas in Chemical industries,Food& Pharmaceuticals Industries, for Fire Control in Coal Mines etc. As Inert Gas in Chemical Industries Food & Pharmaceuticals Industries, Heat Treatment Furnaces, Electronic, Synthetic Fiber Industries and where one needs High Purity gases and hydrogen is tolerable. As Inert Gas in Electronic, Synthetic Fiber, Hi-tech Industries Where one needs Ultra High Purity gases and hydrogen is non - tolerable. CAPACITIES NM3 / HR 01 TO 1000 01 TO 500 01 TO 300 Features: Electronic Programmable Control Panel (PLC System). Automatic start and stop. Highly reliable to run UN-attended for months. Very low maintenance cost. Nitrogen gas supply always under your control. Self-contained Skid Mounted Units for easy site installation. Carbon Molecular Sieves life is minimum 10-12 years.