Spunbonded Non Woven Fabric Making Machine

SMS nonwoven fabrics is made form Polypropylene, There are tri-layer, spunbond + meltblown + spunbond nonwoven. Through special treatment, SMS nonwoven fabric own many special features, such as Medical Repellence(anti-alcohol, anti-blood,anti-oil)grade, Anti-static, Anti-mildew and anti-bacterial, Extrasoft,Hydrophilic, etc. We can produce 14-200gsm SMS nonwoven fabric. It wildly applied in the medical, hygiene, industry fields, such as isolation gowns, patient gowns, wound care, laboratory apparel, procedure gowns,surgical drape, caps and facemask. leg cuff of baby diaper and adult inconvenience diaper, etc.Spunbonded Melting Spunbonded Non Woven Fabric Making machineWhat is the SMS nonwoven SMS (English as: Spunbond + Meltblown + Spunbond Nonwovens) Weight range :30-500 g / square meter; basic width: 1500mm and 2400mm; are composite non-woven, spunbond and melt it isspraying of composite products Non-toxic tasteless, across bacteria efficiently.Special treatment through the device, to achieve anti-static, anti-alcohol, anti-plasma, water repellent and water production and other properties. Uses: 1, health care services labor protection products such as surgery, surgical caps, protective clothing, wash clothes, handbags, etc. 2, sanitation products, such as filter cloth, oil cloth, cloth 3, insulation materials and garment accessories, 4, anti down run downnon-woven anti-Yu SMS industry standards 1 Scope This standard specifies the polypropylene spunbond / meltblown / spunbond composite nonwoven (hereinafter referred to as SMS) of product classification, technical requirements, test methods, inspection rules, packaging and labeling requirements, transportation, storage. This standard applies toto polypropylene-based materials 10g/m2-> 80g/m2 polypropylene SMS Product 2 Normative References The following documents contain provisions which, through reference in this standard the terms of this standard.For dated references, subsequent to all of the amendments (excluding corrections) or revisions do not apply to this standard, however, encourage the parties to reach an agreement under this standard to explore the possibility to use the latest version of these documents.For undated reference documents, the latest versions apply to this standard.GB / T 4744 Determination of water permeability of textile fabrics, hydrostatic pressure test GB / T 5453 Textile, fabric air permeability determination of GB / T 6529 and testing of textiles humidity standard atmospheric FZ / T 60003 Non-woven FZ Determination of mass per unit area/ T 64004 legitimate non-woven stick thin FZ / T 60005 Non-woven breaking strength and breaking elongation of the determination of 3 GB/T3291.3 the established terminology and the following terms apply to the standard 3.1 lump is dropping molten leadlump. 3.2 stiff wire is not hard wire drawing section. 3.3 translation network, the product is not strengthened in before the hanging tear due to foreign body, causing serious uneven fiber network phenomenon. 3.4 fold is the fiber networksuperimposed together by reinforced, and other parts of the superposition of different phenomena. 3.5 over the hole area of 4mm2 hole to hole in the middle of no fibers were. 4 technical requirements of section 4.1 polypropylene (raw material availability requirements) physical properties of