Minimum Quantity Lubrication India MQL System Basic

Kenco's Micro Mist Lubrication System is based on Minimum Quantity Lubrication (MQL) Technology which not only leaves your workshop cleaner, but helps your tools cut cooler, last longer, and produce more good parts. By precisely metering and dispensing the lubricant oil at the cutting tool/work piece interface, you greatly reduce friction at the cut and ultimately save money. This is a Minimum Quantity Lubrication Technique (MQL) that replaces the other coolant systems commonly used in machining. Our System provides a minute (required) amount of high-quality lubricant/Coolant which is precisely applied to the interface of the cutting tool and work piece. The lubricant minimizes friction and greatly reduces the heat generated by machining. The results are improved surface finish and tool life, increased production rates, and the elimination of the costly mess and disposal associate with flood coolant. Principle of working In KENCO's Mist Cooling / Lubrication System the Lubricant / Coolant is atomized to 4 to 6 micron particle sizes, they form a mist and are coalesced at the point of application to lubricate/cool the two surfaces under friction. The Spraying Action occurs in the Jet spray Nozzle block where the lubricant/coolant is atomized and until then it's kept separate in order to provide maximum cooling efficiency. Further as the Coolant expands it gets more capacity to absorb heat from the source (tool-job interface) and whereas here along coolant/Lubricant even air is applied this helps out to blow chips during cutting operations which further avoid heat generation. This Lubricant /Coolant can be controlled through the controlling knob which is placed in the nozzle block and then starts spraying the Coolant /Oil. KENCO MQL SYSTEM, First of its kind in INDIA. INDIA'S MOST TRUSTED PRODUCT..