Aquamat - KAESER
Price on request
Specification
- weight
- 21 Kg - 60 Kg
- dimension
- 625 x 540 x 1482 - 1308 X 790 X 1482 (W x D x H)
- i deal in
- New and Second Hand
- availability
- In Stock
- power supply
- 260 VAC 60 Hz
- tank material
- As Per Requirement
- separator type
- As Per Requirement
- protection type
- IP 54
- automation grade
- Automatic
- installation service
- Yes
- connection control air
- Male hose coupling for internal 8 mm
- connection power supply
- M12 plug-in connector, included
- control air gauge pressure
- 3 - 15 bar
- maximum operating height mm
- 200 cm
- connection condensate inflow
- 3 x G 1/2 | 1 x G 1 / Male hose coupling for internal 13 mm
- connection modbus tcp ethernet
- M12 plug-in connector, user-provided
- connection condensate discharge
- Male hose coupling for internal 23 mm
- electrical power consumption va
- 10
- climate zone 1 ta 30 degreec r h 60
- 12.8 - 108.7 M3 / min
- climate zone 2 ta 30 degreec r h 70
- 10.3 - 92.6 M3 / min
- climate zone 3 ta 30 degreec r h 80
- 9.0 - 80.7 M3 / min
- min max temperature ambient degreec
- +5 - +50
- max gauge pressure at condensate inlet
- 16 bar
- min max temperature control air degreec
- +5 - +50
- min max temperature condensate inflow degreec
- +5 - +50
- max hydrocarbon concentration in discharge water
- 20 mg/l
Add Quantity
Response within 4 hoursFree to enquire
Description
When generating compressed air, significant amounts of oil-containing condensate are produced. Oil-water separators adsorb the oil, ensuring the discharged water meets regulatory standards. With the AQUAMAT i.CF, KAESER has redefined the concept of condensate treatment. Accordingly, the oil-water separator, available for compressor flow rates from 10.3 to 92.6 m³/min, is equipped with the innovative AQUAMAT CONTROL controller for the first time. This advanced system takes over active process control and ensures clean, predictable maintenance. Thanks to ergonomic cartridges, filter material replacement is performed cleanly and without direct contact with the condensate, thereby safeguarding both the environment and service personnel. The modular design concept means that model capacity can be adjusted retrospectively.
Verify supplier credentials before transacting. Enquiries create leads for the supplier.