0.96 Inch 4 Pin OLED Display

₹300.00

Specification

module size: 27.0MM * 27.0MM * 4.1MM
viewing angle: Greater than 160 degree
high resolution: 128 * 64 p
operating voltage: 3.3V Nominal (1.65V to 3.3V)
working temperature: -30 ~70 degree C

Add Quantity

Response within 4 hoursFree to enquire

Description

Tiny 128×64 is a OLED Display based on SSD1306 Display controller chip. The display is mounted on an easy to solder PCB. The SSD1306 Display interfaces to microcontrollers through a I2C serial bus interface.OLED Technology, Self-luminous, need no back-light (consumes less energy)Supports various microcontrollers: Fully compatible with Raspberry Pi, Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.Ultra-low power consumption: full screen lit 0.08WI2C/IIC Interface, needs only 2 IO pins.4.7k pull-up resistors are needed on both SDA and SCL lines.Driver IC: SSD1306Pixel color: BluePinoutsVCC (3.3V ~ 5V)GNDSCLSDA

Verify supplier credentials before transacting. Enquiries create leads for the supplier.