Humiseal1b31 Acrylic Conformal Coating

HUMISEAL 1B31 ACRYLIC CONFORMAL COATING CLEARHumiSeal® 1B31 Acrylic Conformal Coating is a one component, fast curing acrylic coating that is used for circuit assemblies and can be easily repaired. It offers excellent flexibility, moisture and environmental protection, and fluoresces under UV light to aid inspection. It can be applied by spraying, brushing, or dipping methods. 400ML Aerosol Can.HumiSeal 1B31 conformal coating is: an acrylic chemistry fast drying single component excellent moisture and environmental protection for printed circuit assemblies excellent flexibility fluorescence under UV light for ease of inspection reworkability with ease MIL-I-46058C qualification IPC-CC-830 compliance RoHS directive 2015/863/EU Allow 48 hours minimum to reach room temperature before using cans stored or received during cold weather. When applied in conditions of high ambient humidity, blushing (cloudy white film) may appear. Heating the coated assembly in an oven for 1/2 hour at 76°C eliminates this condition. Surface must be cleaned of dirt, wax, grease, flux residues and all similar contaminants for successful application of the coating. Mask areas not requiring coating from overspray using suitable non-silicone masking methods or materials. Shake can vigorously before using and repeat frequently during use. Best results are obtained by spraying from a distance of 30 – 40 cm in light even coats. A film thickness of 25 – 75 microns is sufficient to provide protection. To clean nozzle after use, hold can upside down, then press nozzle for a few seconds. Additional Information: Item Code: 1B31Production Capacity: 1200Delivery Time: 7 to 10 Day's