Cricket Pitch Roller 1.5 Ton

A 1.5-ton (1500 kg) Cricket Pitch Roller is the "heavy hitter" of ground maintenance, typically reserved for high-level club cricket, university grounds, and professional stadiums. At this weight class, the roller provides the deep compaction necessary to create a hard, fast, and consistent bounce that lasts throughout a multi-day match. In 2026, while 1-ton rollers are common for general maintenance, the 1.5-ton model is the preferred choice for final match-day preparation. ### Technical Specifications (Standard 1.5T Model) Feature Specification Gross Weight (Full Ballast) 1,500 kg (1.5 Tons) Net Weight (Empty) 900 kg – 1,100 kg Rolling Width 36 inches to 42 inches (approx. 915mm – 1060mm) Drum Diameter 24 inches to 30 inches (Larger diameter prevents "shoving" the soil) Drive System Dual-Drum Drive (Both rollers powered for better traction) Transmission Hydrostatic (Diesel/Petrol) or Brushless DC (Electric) ### Key Features & Engineering Heavy-Duty Chassis: Unlike lighter models, the 1.5-ton chassis is reinforced with high-tensile steel to prevent flexing under maximum ballast. Dual Ballast Tanks: Most units allow you to adjust the weight by adding water or iron sand to both the front and rear drums. This allows the groundsman to scale from 1 ton (daily use) to 1.5 tons (match prep). Power Steering: At 1,500 kg, manual steering is exhausting. Modern 1.5T rollers feature hydraulic power steering or electronic power-assist for effortless maneuvering. Scraper Blades: Spring-loaded heavy-duty scrapers on both drums are essential at this weight to prevent damp soil from sticking and ruining the surface level. Vibration Isolation: Quality models include rubber-mounted seating and controls to protect the operator from the high-frequency vibrations common in heavy machinery. ### Why Choose 1.5 Tons Over 1 Ton? Deep Compaction: A 1-ton roller mostly compacts the top 1-2 inches. A 1.5-ton roller reaches deeper into the clay base, ensuring the pitch doesn't "break up" or go soft on Day 2 or 3 of a match. Surface Leveling: The extra mass helps "iron out" minor footmarks and undulations more effectively than lighter units. Efficiency: Because of the increased pressure per square inch, you often require fewer passes to achieve the desired pitch hardness, saving time and energy. ### Comparison: Electric vs. Diesel (1.5 Ton) Diesel/Petrol: Offers "infinite" runtime for large multi-pitch complexes and generally has a lower upfront purchase price. Electric: Features higher "instant torque" which is helpful for moving 1.5 tons from a standstill without slipping. It is virtually silent and has zero fuel costs. .